Product ID:INSULMIDE FOAM INSULATION
MSDS Date:01/01/1992
FSC:9330
NIIN:00N053533
MSDS Number: BVVPV

MANVILLE SALES CORP

DENVER, CO 80217-5108
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 303-978-4900

Cage: 75165

SCHULLER INTERNATIONAL INC.

5108 DENVER, CO 80217-5108 US

Telephone: 303-978-4900

Cage: 75165

POLYIMIDE FOAM

Fraction By Weight: 100%

OSHA PEL 5 MG/M3 RDUST (MFR)

ACGIH TLV: 10 MG/M3 TDUST(MFR)

OF SPECIFIC VENTILATION SYSTEMS SHOULD BE

RTECS: 9999999ZZ

GUIDELINES. SPECIAL CONSIDERATIONS FOR

RTECS: 9999999ZZ

DISCUSSED, VACUUM EQUIPMENT (WHERE POSSIBLE) BEFORE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DUST GENERATED FROM
CUTTING/FABRICATING THIS PROD MAY CAUSE SCRATCHY THROAT, CONGESTION
& SLIGHT COUGHING. EYE IRRIT MAY ALSO OCCUR DUE TO AIRBORNE DUST.
ACUTE:DUSTS ARE MECH IRRITS, WHICH MEANS THAT IT MAY CAUSE
IRRIT/SCRATCHINESS OF THROAT & ITCH IN EYES. TARGET ORGANS:UPPER
RESP PASSAGES & EYES. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:INHAL:IRRIT OF UPPER RESP TRACT
(SCRATCHY THROAT), COUGHING & CONGESTION MAY OCCUR IN EXTREME
EXPOSURES. INGEST:THIS PROD NOT LIKELY TO BE INGESTED. IF PROD IS
INGESTED, IT MAY CAUSE TEMPORAR Y IRRIT TO GI TRACT (ESP STOM). EYE
CONT:TEMPORARY IRRIT (ITCH)/REDNESS MAY OCCUR. CHRONIC:NO KNOWN
LONG-TERM HLTH EFTS.
Medical Cond Aggravated by Exposure:PRE-EXISTING CHRONIC EYE OR
RESPIRATORY DISEASES.

First Aid:INHAL:REMOVE TO FRESH AIR. DRINK WATER TO CLEAR THROAT & BLOW
NOSE TO REMOVE DUST. SKIN:WASH GENTLY W/WARM WATER TO REMOVE DUST.
WASH HANDS BEFORE EATING/USING RESTROOM. INGEST:SHOULD BE TREATED
SYMPT OMATICALLY. RINSE MOUTH W/WATER TO REMOVE DUST & DRINK PLENTY
OF WATER TO HELP REDUCE IRRIT. EYE:DO NOT RUB/SCRATCH YOUR EYES.
DUST PARTICLES MAY CAUSE LENS OF EYE TO BE SCRATCHED. WASH W/LG
(SUPDAT)

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . NO SPECIAL PROCEDURES ARE EXPECTED TO BE NECESSARY FOR
THIS PRODUCT.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:VACUUM DUSTS. IF SWEEPING IS NECESSARY, USE A
DUST SUPPRESSANT (SUCH AS WATER) - DO NOT SWEEP DUSTS OR USE
COMPRESSED AIR FOR CLEAN-UP. THESE PROCEDURES WILL HELP TO MINIMIZE
POTENTIAL EXPOSURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MATERIAL SHOULD BE KEPT DRY &
PROTECTED FROM ELEMENTS. WAREHOUSE STORAGE SHOULD BE I/A/W PACKAGE
DIRECTIONS, IF ANY.
Other Precautions:USE PROTECTIVE EQUIPMENT AS DESCRIBED IN EXPOSURE
CONTROL/PERSONAL PROTECTION SECTION WHEN HANDLING LOOSE OR
UNPACKAGED MATL. UNDER NORMAL CNDTNS OF USE, THIS PROD IS NOT
EXPECTED TO CREATE ANY UNUSUA L EMERGENCY HAZARDS.

Respiratory Protection:USE A NIOSH/MSHA APPROVED DUST/MIST RESPIRATOR
TO PROTECT AGAINST NUISANCE DUST & FIBERS. (EXAMPLES OF NIOSH/MSHA
APPROVED DISPOSABLE DUST/MISTS RESPS FOR THIS TYPE OF EXPOS ARE
3M9900 & MOLDEX 2200 R ESPS).
Ventilation:LOC EXHST/GEN DILUTION VENT SHOULD BE PROVIDED AT AREAS OF
CUTTING TO REMOVE AIRBORNE DUST & TO KEEP AIRBORNE (SUPDAT)
Protective Gloves:LEATHER OR COTTON GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:PROT EQUIP SHOULD BE PROVIDED AS NEC TO PVNT
IRRIT TO THROAT & EYES & TO KEEP EXPOS BELOW APPLIC EXPOS (ING 3)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:AMTS OF WATER FOR AT LST 15 MINS. IF IRRIT PERSISTS,
CONT MD. NOTES TO MD:TREATMENT SHOULD BE DIRECTED TOWARD REMOVING
SOURCE OF IRRIT W/SYMPTOMATIC TREATMENT AS NEC. VENT:DUST BELOW AP
PLIC EXPOS LIMS & GUIDELINES. NEED FOR VENT SYS SHOULD BE EVALUATED
BY PROFESSIONAL INDUS HYGIENIST, WHILE DESIGN(ING 2)

Spec Gravity:<0.01 (H*2O=1)
Solubility in Water:NIL
Appearance and Odor:BEIGE TO YELLOWISH FOAM W/NO ODOR.
Percent Volatiles by Volume:NEGLIG

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE REPORTED.

Waste Disposal Methods:WASTES ARE NOT HAZARDOUS AS DEFINED BY RCRA (40
CFR 261). COMPLY W/FEDERAL, STATE & LOCAL REGS FOR DISP OF
POLYIMIDE FOAM PRODS. IF YOU ARE UNSURE OF REGS, CONT YOUR LOC
PUBLIC HLTH DEPT/LOCAL OFFICE OF THE EPA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.